|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Amplifier, Power, 2.0 W 6.5--9.5 GHz Features 903261 -- Preliminary Information MAAPGM0064 2 Watt Saturated Output Power Level Variable Drain Voltage (4-10V) Operation MSAGTM Process High Performance Ceramic Bolt Down Package Primary Applications APGM0064 YWWXXX Multiple Band Point-to-Point Radio SatCom ISM Band Description The MAAPGM0064 is a 2-stage 2 W power amplifier with on-chip bias networks in a bolt down ceramic package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM's GaAs Multifunction SelfAligned Gate Process. M/A-COM's MSAGTM process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors and multiple implant capability enabling power, low-noise, switch and digital FETs on a single chip. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging. Pin Number 1 2 3 4 5 6 7 8 9 10 RF Designator No Connection VGG RF IN VGG No Connection No Connection VDD RF OUT VDD No Connection Maximum Operating Conditions 1 Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF, 40% Idss) Quiescent DC Power Dissipated (No RF) Junction Temperature Storage Temperature Symbol PIN VDD VGG IDQ PDISS TJ TSTG Absolute Maximum 23.0 +12.0 -3.0 950 7.9 180 -55 to +150 Units dBm V V mA W C C 1. Operation outside of these ranges may reduce product reliability. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 2.0 W 6.5--9.5 GHz Recommended Operating Conditions Characteristic Drain Supply Voltage Gate Supply Voltage Input Power Junction Temperature Thermal Resistance Package Base Temperature Symbol VDD VGG PIN TJ JC TB 12.4 Note 2 Min 4.0 -2.4 Typ 8.0 -2.0 18.0 Max 10.0 -1.3 21.0 150 903261 -- Preliminary Information MAAPGM0064 Unit V V dBm C C/W C 2. Maximum Package Base Temperature = 150C -- JC* VDD * IDQ Electrical Characteristics: TB = 40C3, Z0 = 50 , VDD = 8V, IDQ 600 mA, Pin = 18 dBm, RG 120 Parameter Bandwidth Output Power Power Added Efficiency 1-dB Compression Point Small Signal Gain Input VSWR Output VSWR Gate Supply Current Drain Supply Current Noise Figure 2 nd Symbol f POUT PAE P1dB G VSWR VSWR IGG IDD NF 2f 3f OTOI IM3 IM5 Typical 6.5-9.5 33 30 32 17 1.8:1 3.0:1 <5 <1 9.5 -20 -45 41 -10 -25 Units GHz dBm % dBm dB mA mA dB dBc dBc dBm dBm dBm Harmonic 3rd Harmonic Output Third Order Intercept 3 Order Intermodulation Distortion, Single Carrier Level = 20 dBm 5th Order Intermodulation Distortion, Single Carrier Level = 20 dBm rd 3. Adjust VGG between -2.4 and -1.3 V to achieve indicated IDQ. Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. 2. 3. 4. Apply VGG = -1.7 V, VDD= 0 V. Ramp VDD to desired voltage, typically 8 V. Adjust VGG to set IDQ, (approxmately @ -1.7V). Set RF input. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 2.0 W 6.5--9.5 GHz 50 50 903261 -- Preliminary Information MAAPGM0064 40 35 40 40 30 25 20 15 10 5 0 6.0 6.5 7.0 7.5 8.0 Frequency (GHz) Figure 1. Output Power and Power Added Efficiency vs. Frequency at VDD = 8V and PIN = 18 dBm 8.5 9.0 9.5 0 10.0 POUT (dBm) P1dB (dBm) 30 POUT 20 PAE 30 PAE (%) VDD = 4V VDD = 8V VDD = 6V VDD = 10V 20 10 10 0 6.0 6.5 7.0 7.5 8.0 Frequency (GHz) Figure 2. 1dB Compression Point vs. Drain Voltage 8.5 9.0 9.5 10.0 40 35 1.2 1.0 30 25 20 15 10 5 0 -4 -2 0 2 4 6 8 PIN (dBm) Figure 3. Output Power vs. Input Power at VDD = 8V 10 12 14 16 18 20 6.5 GHz 8.0 GHz 9.5 GHz 0.8 IDS (A) POUT (dBm) 0.6 0.4 6.5 GHz 8.0 GHz 0.2 9.5 GHz 0.0 -4 -2 0 2 4 6 8 PIN (dBm) Figure 4. Drain Current vs. Input Power at VDD = 8V 45 10 12 14 16 18 20 50 POUT 40 PAE 30 Gain (dB) Input VSWR Output VSWR 6 40 35 30 25 5 POUT (dBm) Gain (dB) 20 20 15 10 5 PAE (%) 25 15 3 10 10 2 5 0 4.0 5.0 6.0 7.0 Drain Voltage (V) Figure 5. Saturated Output Power and Power Added Efficiency vs. Drain Voltage at fo = 8 GHz 8.0 9.0 0 10.0 6.0 6.5 7.0 7.5 8.0 Frequency (GHz) 8.5 9.0 9.5 1 10.0 Figure 6. Small Signal Gain and VSWR vs. Frequency at VDD = 8V. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. VSWR 30 20 4 Amplifier, Power, 2.0 W 6.5--9.5 GHz 903261 -- Preliminary Information MAAPGM0064 Figure 7. CR-15 Package Dimensions The CR-15 is a high frequency, low thermal resistance package. The package consists of a cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish consists of electrolytic gold over nickel plate. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 2.0 W 6.5--9.5 GHz 903261 -- Preliminary Information MAAPGM0064 V GG 0.1 F 0.1 F V DD 100 pF 100 pF APGM0064 YWWXXX RF IN RF OUT 100 pF 100 pF Pin Number 1 2 3 4 5 6 RF Designator No Connection VGG RF IN VGG No Connection No Connection VDD RF OUT VDD No Connection Figure 8. Recommended Bias Configuration 7 8 9 10 Assembly Instructions: This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of the package to housing interface. Refer to M/A-COM Application Note #M567* for more information . For applications where surface mount components are to be installed after the CR-15 installation, this package will not be damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static discharge (ESD) safe. * Application Notes can be found by going to the Site Search Page on M/A-COM's web page (http://www.macom.com/search/search.jsp) and searching for the required Application Note. Biasing Notes: The 100pF bypass capacitors must be placed as close to the VGG and VDD pins as possible (recommended < 100 mils). A negative bias must be applied to VGG before applying a positive bias to VDD to prevent damage to the amplifier. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAAPGM0064 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |